DEEP CRYSTAL CARNAUBA WAX

$37.99 RRP

311 grams

|

A2216

DEEP CRYSTAL CARNAUBA WAX

$37.99 RRP

|

311 grams

|

A2216

In order to lock in and protect the eye dazzling finish you created with Steps 1 and 2 of the Deep Crystal System, you need to apply a protective coating that will enhance and extend the perfect finish created by Deep Crystal System Polish. Our Deep Crystal System Carnauba Wax delivers durable, long-lasting high gloss protection with superb water beading action.

HOW TO USE: For hand application use a foam Hand Applicator Pad (APPAD). Apply a thin even coat to the entire vehicle paintwork and let dry to a haze. Remove residue with a Meguiar’s Supreme Shine Microfibre Cloth (X2010) or Microfibre Polishing Cloth (AG3030). ALWAYS READ FULL DIRECTIONS PRINTED ON THE PRODUCT PRIOR TO USE.

THIS GOES WITH THAT

YOU MAY ALSO LIKE

FAQ's

CAN I USE POLISH AND WAX PRODUCTS ON FACTORY MATTE FINISH PAINT?

Never apply any type of polish or wax product to a Matte Finish Paint surface as they will cause the finish to become glossy. You can remove finger prints, smears and very light marks using either Quik Detailer (A3316) or Ultimate Quik Detailer (G14422).

ARE THERE TIMES WHEN I SHOULDN’T WAX MY CAR?

Yes, if your car has new paint applied as a result of smash repair work or a respray. You should wait 8 weeks to allow for the paint to cure and harden before you apply a wax product to protect your paint.

CAN I POLISH AND WAX MY CAR IF IT HAS PAINT PROTECTION?

Polish and wax products shouldn’t be used on cars that have paint protection applied, and may void the manufacturers warranty terms and conditions if used.

HOW DO I BEST APPLY POLISH AND WAXES?

For best results apply polish & wax products with a foam Hand Applicator Pad (APPAD). Apply small amounts of product on the foam applicator pad and spread a thin, even coat over the paint surface.