NXT Generation Water Bead Booster

$29.99 RRP

710 ml

|

G30524

NXT Generation Water Bead Booster

$29.99 RRP

|

710 ml

|

G30524
  • Removes contamination to restore water-repelling surface tension
  • Lasting protective coating with extreme water beading
  • Hydrophobic Polymer Technology for significantly less drying time

Water Bead Booster utilises Meguiar’s Hydrophobic Polymer Technology to create a protective layer on paintwork and exterior trim ? that lasts longer than any spray wax. Easy spray and wipe application creates extreme water repelling characteristics. This provides several benefits, including; faster drying time, while minimising water spotting, acid rain etching, discolouration and water-borne pollution damage. Apply directly to surface, or as a booster over NXT Polymer Paint Sealant.
Allow 24 hours to fully cure for maximum beading.

THIS GOES WITH THAT

YOU MAY ALSO LIKE

FAQ's

CAN I USE POLISH AND WAX PRODUCTS ON FACTORY MATTE FINISH PAINT?

Never apply any type of polish or wax product to a Matte Finish Paint surface as they will cause the finish to become glossy. You can remove finger prints, smears and very light marks using either Quik Detailer (A3316) or Ultimate Quik Detailer (G14422).

ARE THERE TIMES WHEN I SHOULDN’T WAX MY CAR?

Yes, if your car has new paint applied as a result of smash repair work or a respray. You should wait 8 weeks to allow for the paint to cure and harden before you apply a wax product to protect your paint.

CAN I POLISH AND WAX MY CAR IF IT HAS PAINT PROTECTION?

Polish and wax products shouldn’t be used on cars that have paint protection applied, and may void the manufacturers warranty terms and conditions if used.

HOW DO I BEST APPLY POLISH AND WAXES?

For best results apply polish & wax products with a foam Hand Applicator Pad (APPAD). Apply small amounts of product on the foam applicator pad and spread a thin, even coat over the paint surface.