Hi-performance, spray on carnauba protection offers dramatically deeper, darker reflections with increased gloss and shine. Just mist on and wipe off to wax your entire car (wet or dry) in minutes. For superior results during application and removal, we recommend using our Microfibre Polishing Cloth or 100% Terry Towelling Cloth.
HOW TO USE: Mist Quik Wax directly onto paint surface. Spread evenly over a section at a time using 100% terry towelling or Microwipe cloth. Wipe off residue with a clean Microwipe cloth (AG3030). * Always read full directions printed on the product prior to use.
THIS GOES WITH THAT
YOU MAY ALSO LIKE
CAN I USE POLISH AND WAX PRODUCTS ON FACTORY MATTE FINISH PAINT?
Never apply any type of polish or wax product to a Matte Finish Paint surface as they will cause the finish to become glossy. You can remove finger prints, smears and very light marks using either Quik Detailer (A3316) or Ultimate Quik Detailer (G14422).
ARE THERE TIMES WHEN I SHOULDN’T WAX MY CAR?
Yes, if your car has new paint applied as a result of smash repair work or a respray. You should wait 8 weeks to allow for the paint to cure and harden before you apply a wax product to protect your paint.
CAN I POLISH AND WAX MY CAR IF IT HAS PAINT PROTECTION?
Polish and wax products shouldn’t be used on cars that have paint protection applied, and may void the manufacturers warranty terms and conditions if used.
HOW DO I BEST APPLY POLISH AND WAXES?
For best results apply polish & wax products with a foam Hand Applicator Pad (APPAD). Apply small amounts of product on the foam applicator pad and spread a thin, even coat over the paint surface.